Ford 2007 F-150 Page 322 Owner'S Manual Download

Page: 322 / 376

•

4.6L/5.4L V8 engine

5. Locate and carefully remove the engine oil level indicator (dipstick).

6. Wipe the indicator clean. Insert the indicator fully, then remove it
again.

•

If the oil level is

between the lower and upper holes or between

the MIN and MAX marks (depending on application),

the oil

level is acceptable.

DO NOT ADD OIL.

•

4.2L V6 engine

2007 F-150

(f12)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

322

Summary of Contents for 2007 F-150

























































































































































































































































































































































































Search results

Summary of Contents for 2007 F-150

Reviews:

Related manuals for 2007 F-150

Brands by name

Popular brands

Ford 2007 F-150, Owner'S Manual

Search results

Summary of Contents for 2007 F-150

Reviews:

Related manuals for 2007 F-150

Brands by name

Popular brands