Ford 2007 Edge Page 50 Owner'S Manual Download

Page: 50 / 320

VOL (Volume):

When in Single Play, press to increase (

) or

decrease (

) the volume over all speakers. When in Dual Play, press

to increase (

) or decrease (

) the volume for the wired

headphones. (Wireless headphone volume is controlled with the rotary
dial on the right ear piece.)

Fast Forward/Next:

In DVD mode, press and hold for a quick

advance within the DVD. Press and release to advance to the next
chapter. In CD/MP3 mode, press to access the next track.

Play/Pause:

Press to play or pause a DVD.

10.

SHUFFLE:

Press to play all tracks on the current CD/MP3 disc in

random order.

11.

STOP:

Press to stop the current DVD or CD/MP3.

12.

Speaker/Headphone

(Single/Dual Play): Press to toggle

between Single Play (same media playing through all speakers) and Dual
Play (headphone mode — the rear speakers are muted).

13.

Keypad:

Use the numeric controls to enter in a specific CD/MP3

track or DVD chapter to be played.

14.

C (Cancel):

Press to cancel/clear the numeric input (i.e. chapter

number).

15.

MEDIA:

Press to cycle through the possible media sources: AM,

FM1, FM2, SAT (if equipped), CD, CASSETTE, DVD, LINE IN
(if equipped), DVD-AUX.
Channel B can only access DVD and AUX sources.

16.

VIDEO:

Press to cycle through video states: DVD-DISC, DVD-AUX,

NON-DVD, Off.

17.

EJECT:

Press to eject a disc from the FES.

18.

Fast reverse/Previous:

When a DVD is playing, press and hold for a

quick reverse within the DVD. Press and release for the previous
chapter. Press PLAY to resume normal playback speed and volume.
In CD/MP3 mode, press to access the previous track.

19.

MENU:

Press to access the DVD disc menu for selections. Press

MENU again when in the DVD disc menu to access the system set-up
menu.

20.

SUBTITLE

(DVD dependent): Press to turn the subtitle feature ON

or OFF.

21.

LANGUAGE

(DVD dependent): Press to select the desired

language.

2007 Edge

(edg)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for 2007 Edge

































































































































































































































































































































Search results

Summary of Contents for 2007 Edge

Reviews:

Related manuals for 2007 Edge

Brands by name

Popular brands

Ford 2007 Edge, Owner'S Manual

Search results

Summary of Contents for 2007 Edge

Reviews:

Related manuals for 2007 Edge

Brands by name

Popular brands