Ford 2006 E-150 Page 69 Owner'S Manual Download

Page: 69 / 248

Shorten and fasten the belt when
not in use.

Safety belt warning light and indicator chime

The safety belt warning light illuminates in the instrument cluster and a
chime sounds to remind the occupants to fasten their safety belts.

Conditions of operation

If...

Then...

The driver’s safety belt is not
buckled before the ignition
switch is turned to the ON
position...

The safety belt warning light
illuminates and the warning chime
sounds 4-8 seconds.

The driver’s safety belt is
buckled while the indicator
light is illuminated and the
warning chime is sounding...

The safety belt warning light and
warning chime turn off.

The driver’s safety belt is
buckled before the ignition
switch is turned to the ON
position...

The indicator chime will remain off
and the safety belt warning lamp will
illuminate for 4-8 seconds.

BeltMinder

姟

The BeltMinder

娂

feature is a supplemental warning to the safety belt

warning function. This feature provides additional reminders to the
driver that the driver’s safety belt is unbuckled by intermittently
sounding a chime and illuminating the safety belt warning lamp in the
instrument cluster.

2006 Econoline

(eco)

Owners Guide (post-2002-fmt)
USA

(fus)

Seating and Safety Restraints

Summary of Contents for 2006 E-150

























































































































































































































































Search results

Summary of Contents for 2006 E-150

Reviews:

Related manuals for 2006 E-150

Brands by name

Popular brands

Ford 2006 E-150, Owner'S Manual

Search results

Summary of Contents for 2006 E-150

Reviews:

Related manuals for 2006 E-150

Brands by name

Popular brands