Ford 2005 Freestyle Owner'S Manual Download

Page: 53 / 288

High beams

Pull the lever towards you, to the
second detent, to activate. Pull the
lever towards you again to
deactivate.

Flash to pass

Pull toward you, to the first detent,
to activate and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel and all applicable
switches in the vehicle during
headlamp and parklamp operation.

Move the control to the full upright
position, past detent, to turn on the
interior lamps.

REVIEW COPY

2005 Freestyle

(219)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Lights

Summary of Contents for 2005 Freestyle

































































































































































































































































































Search results

Summary of Contents for 2005 Freestyle

Reviews:

Related manuals for 2005 Freestyle

Brands by name

Popular brands

Ford 2005 Freestyle, Owner'S Manual

Search results

Summary of Contents for 2005 Freestyle

Reviews:

Related manuals for 2005 Freestyle

Brands by name

Popular brands