REMOVAL AND INSTALLATION
Temperature Blend Door Actuator —LH
Removal and Installation
1. Remove the floor console. For additional information, refer to
Section 501-12
.
2. Remove the lower steering column opening finish panel.
1. Remove the screws.
2. Disengage the retaining clips and remove the lower steering column opening finish panel.
3. Remove the LH center instrument panel support brace.
1. Remove the bolts.
2. Remove the nuts and remove the brace.
4. Remove the screws and remove the LH floor duct.
SECTION 412-04: Control Components
2002 Explorer/Mountaineer Workshop Manual
Page 1 of 3
2002 Explorer/Mountaineer Workshop Manual
11/20/2009
file://C:\TSO\tsocache\YOUR-AD45054618_4024\S2N~us~en~file=s2nc4010.htm~gen~...
