1. Insert the first previously
programmed
coded key
into the
ignition and turn the ignition from 3
(OFF) to 4 (ON) (maintain ignition
in 4 (ON) for at least one second).
2. Turn ignition to 3 (OFF) then 2
(LOCK) and remove the first
coded
key
from the ignition.
3. Within five seconds of removing
the first
coded key,
insert the
second previously programmed
coded key
into the ignition and turn the
ignition from 3 (OFF) to 4 (ON) (maintain ignition in 4 (ON) for at least
one second but no more than five seconds).
4. Turn the ignition to 3 (OFF) then 2 (LOCK) and remove the second
coded key
from the ignition.
5. Within 10 seconds of removing the second
coded key,
insert the new
unprogrammed key (new key/valet key) into the ignition and turn the
ignition from 3 (OFF) to 4 (ON) (maintain ignition in 4 (ON) for at least
one second). This step will program your new key to a coded key.
6. To program additional new unprogrammed key(s), repeat this
procedure from step 1.
If successful, the new coded key(s) will start the vehicle’s engine and the
theft indicator will illuminate for three seconds and then go out.
If not successful, the new coded key(s) will not start the vehicle’s engine
and the theft indicator will flash on and off and you may repeat steps 1
through 6. If failure repeats, bring your vehicle to your dealership to
have the new spare key(s) programmed.
KEYLESS ENTRY SYSTEM
With the keyless entry keypad, you
can:
•
lock or unlock the vehicle doors
without using the key
•
open trunk
•
disable/enable horn chirp
•
disable/enable autolock
See also
Remote entry system
in this chapter for more information.
3
2
1
5
4
1 2
3 4
5 6
7 8
9 0
Controls and features
98
