1. Start the vehicle.
2. Locate compass sensor mounted
at base of mirror.
3. Insert a paperclip into the small
hole on the bottom of the compass
sensor. Hold down until ZONE
appears in the trip computer
display Continue to hold down
until ZONE disappears and CAL is
displayed.
4. Press and hold the MODE
control until CAL appears in the
display (approximately eight
seconds) and release.
5. Drive the vehicle slowly (less
than 5 km/h [3 mph] in circles until
CAL indicator turns off (4–5
complete circles).
6. The compass is now calibrated.
Trip computer (if equipped)
This component displays a variety
of system displays. The appearance
of the component in the overhead
console may vary according to
your vehicle’s equipment package.
For more information on the
operation and functions of the trip
computer, refer to
Trip computer
in the
Instrumentation
chapter.
exd_message_center
exd_lamps_overhead_title
Controls and features
53
