Ford 1996 Escort, Manual

Page: 314 / 387

315
% * [SV29300(ALL)05/95]
Automatic Transaxle Fluid
*
[SV29310(ALL)03/95]
Under normal circumstances, you do not need to
check the fluid level of the transaxle, since your
vehicle does not use up transaxle fluid. Refer to
the Maintenance Schedule and Record booklet for
replacement intervals. However, if the transaxle
is not working properly — for instance, the
transaxle may slip or shift slowly, or you may
notice some sign of fluid leakage — the fluid
level should be checked.
*
[SV29335(ALL)01/95]
NOTE: If the vehicle has been operated for an
extended period at high speeds, driven
in city traffic during hot weather, or
has been pulling a trailer, the vehicle
should be turned off for about 30
minutes to allow the fluid to cool
before checking.
%
*
[SV29340(ALL)02/93]
Checking the Automatic Transaxle Fluid
[SV29345(ALL)03/95]
It is preferable to check the transaxle fluid level
at normal operating temperature after
approximately 20 miles (32 km) of driving.
*
[SV29350(ALL)02/95]
With the vehicle on a level surface and the brake
pedal fully applied, start the engine and move
the gearshift selector through all of the gears.
Allow sufficient time for each position to engage.
Securely latch the gearshift selector in the P
(Park) position. Fully set the parking brake and
leave the engine running.
*
[SV29370(ALL)01/95]
Wipe off the dipstick cap and pull the dipstick
out. Wipe the indicator end clean. Put the
dipstick back into the filler tube and make sure
it is fully seated. Pull the dipstick out and read
the fluid level.
[SV29392(ALL)12/89]
When checking fluid at the normal operating
temperature, the fluid level should be within the
normal operating temperature marks on the
File:15ctsve.ex
Update:Tue Sep 19 14:37:50 1995