Ford 1996 E150 Page 361 Owner'S Manual Download

Page: 361 / 388

363

[SV58400( ALL)01/95]

Battery

[SV58500( ALL)01/95]

❑

Check and recharge as necessary.

[SV58600( ALL)01/95]

❑

Keep connections clean and covered with a
light coat of grease.

[SV58700( ALL)01/95]

Brakes

[SV58800( ALL)01/95]

❑

Make sure brakes and parking brake are fully
released.

[SV58900( ALL)01/95]

Tires

[SV59000( ALL)10/95]

❑

Maintain recommended air pressures.

[SV59100( ALL)01/95]

Miscellaneous

[SV59200( ALL)01/95]

❑

Make sure all linkages, cables, levers and
clevis pins under vehicle are covered with
grease to prevent rust.

[SV59300( ALL)05/95]

❑

Move vehicles at least 25 feet (10 m) every 15
days to lubricate working parts to prevent
corrosion.

File:14ltsve.ex

Update:Wed Apr 17 08:40:13 1996

Summary of Contents for 1996 E150





































































































































































































































































































































































































Search results

Summary of Contents for 1996 E150

Reviews:

Related manuals for 1996 E150

Brands by name

Popular brands

Ford 1996 E150, Owner'S Manual

Search results

Summary of Contents for 1996 E150

Reviews:

Related manuals for 1996 E150

Brands by name

Popular brands