M-6066-SGT (Black)/M-6066-SGTP (Polished)
SVT Mustang Supercharger Upgrade Kit
INSTALLATION INSTRUCTIONS
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
Please contact the Techline for the most current instruction information (800) FORD788.
! ! ! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION ! ! !
OVERVIEW:
This kit is designed for use on 2007-09 Ford SVT Mustangs.
NOTES:
•
BEFORE INSTALLING the SVT Mustang Supercharger Upgrade Kit, please register this product by
following the steps listed on the yellow voucher card included with the kit. PRODUCT REGISTRATION IS
REQUIRED to receive the ProCal flash tool used to recalibrate the vehicle PCM. Operating the engine
without the PCM recalibration will result in engine damage or failure and will VOID THE WARRANTY.
•
Please read the installation instructions carefully and verify that all items are present. If you are missing hardware
or have any questions, please contact the Ford Racing Techline at 1(800) FORD788.
•
Premium fuel (91 octane or higher) is required to prevent “spark knock” or detonation under certain operating
conditions. The use of fuel additives (i.e., octane boosters) is not recommended. There is a possibility that these
chemicals can damage your engine and cause drivability issues with your vehicle.
WARNING:
2007 SVT Mustangs must use upgraded damper M-6312-SVT to maintain warranty coverage
Techline (800) FORD788
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
IS-1850-0146
Page 1 of 29
