Techline 1-800-367-378
Page 2 of 4
IS M-12655-F 032720
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS © Ford Motor Company 2020
Ford Factory Shop Manual purchase options
www.motorcraftservice.com
M-12655-F
PROCAL4 INSTRUCTIONS
Saving Stock calibration to ProCal 4 tool
1.
Turn ignition to “RUN” position
***NOTE*** DO NOT start engine. Keep foot off brake/clutch to ensure engine does
not start
2.
Connect tool to the vehicle OBDII port (Generally located on the bottom of the dash, to
the right of the hood release)
3.
Select “PROGRAMMING” option in the main menu and follow the on-screen prompts to
read/save your stock calibration file. Do not turn off the ignition or unplug the tool until
prompted to do so.
Downloading Performance calibration to ProCal 4 tool
1.
Connect ProCal 4 tool to PC using provided USB cable
2.
Open ProCal software and confirm VIN now displays within software
3.
Software will prompt user to backup/save stock calibration to FPP servers for backup
purposes, in case of ProCal 4 loss/damage/etc.
4.
After successful backup of stock calibration, the software will download the FPP
performance calibration.
a.
Follow any on-screen prompts that may occur
5.
Confirm software now shows Ford Performance calibration in addition to Stock file
Installing performance calibration in vehicle
***NOTE*** ONCE CALIBRATION PROCESS HAS BEGUN, DO NOT PRESS ANY
BUTTONS OR DISCONNECT TOOL UNTIL PROMPTED TO DO SO. ENSURE ALL
ELECTRONIC ITEMS (RADIO, WINDOWS, DOORS, LIGHTS) ARE OFF AND ARE NOT
OPERATED UNTIL CALIBRATION PROCESS IS COMPLETE
1.
Connect ProCal 4 tool to vehicle OBDII port
2.
Ensure vehicle is in “RUN” position (Key on, Engine Off)
***NOTE*** ENGINE MUST NOT BE STARTED/RUNNING UNTIL PROMPTED BY TOOL, OR
CALIBRATION PROCESS IS COMPLETE
3.
Select “PROGRAMMING” option from main menu
4.
Select “Preloaded calibration” Option on ProCal 4, and Drag/Click to select the desired
calibration.
***NOTE*** DURING CALIBRATION PROCESS, THERE WILL BE VARIOUS WARNING
CHIMES/ALARMS (Check Engine light, TPMS light, etc). THIS IS EXPECTED, AND PART OF
THE PROCESS.
5.
Follow ALL on-screen prompts, until “Clearing Codes, Finished, Key off for 3 seconds” is
displayed, signaling the end of the procedure
