FORCE1 RC
12
SPINDLE TUBE WALL LUBRICATION
PICTURE 13
PICTURE 16
PICTURE 19
PICTURE 14
PICTURE 17
PICTURE 20
PICTURE 15
PICTURE 18
PICTURE 21
1. Unplug the motor wire (Picture 13).
2. Pull out the cooling rubber hose (Picture 14).
3. Unscrew the motor from the motor seat (Picture 15).
4. Remove the motor from the seat module (Picture 16).
5. Hold down the main shaft rubber pieces, using a wrench lockout and propeller (Picture 17).
6. Put the spindle away a distance in the direction of the bow (Picture 18).
7. Add a moderate amount of lubrication oil to the tail fo the spindle tube (Picture 19).
8. Rotating the spindle forward and backward, pull slowly and let the lubrication oil on the spindle tube
wall distribute evenly. (Picture 20).
9. Hold down the main shaft rubber, using a wrench to tighten the screw down and propeller (Picture 21).
Summary of Contents for Velocity Wave
Page 2: ......
