U49C RED HERON
User Manual
13
PREFLIGHT OPERATION
1. Fly in an open area and abide by all local and federal guidelines. Check the FAA’s B4UFLY mobile app
for up-to-date drone flight info.
2. Make sure your drone and transmitter batteries are fully charged.
3. Put the left stick of the transmitter in the middle position.
4. Follow the Calibration instructions closely. Always turn ON your transmitter first before flying, and
turn OFF the drone first when you’re finished.
5. Make sure the connection is solid between your battery and motor; vibration may cause loosening.
6. Make sure the propellers are installed correctly and the motors are working normally after unlocking.
7. Make sure your drone is facing away from you.
PREFLIGHT CHECKLIST
FIGURE 22
FIGURE 23
CALIBRATION
Calibrate your drone before every use and after crashing for optimum flight.
1. Turn on the transmitter, push the left stick all the way down and then release (Fig. 22). The left stick will
spring back automatically, and is now ready for pairing.
2. Power on the drone and place it on a flat, horizontal surface.
3. Push the right stick down and to the right, then release (Fig. 23). The drone body lights flash, which
indicates the drone is calibrating. When the lights turn solid, the drone has been successfully calibrated.
Do not move the left stick before calibration completion.
NOTE:
Recalibrate your drone after crashes if it is not performing properly.
Summary of Contents for U49C RED HERON
Page 2: ......
