Force USA JX-DS926, Owner'S Manual

Page: 35 / 49

Step 21
A. Attach the 4800MM pecfly cable(134#) through the opening of the pecfly pulley bracket (46#)as the
diagram shows,Make sure that the ball stopper should be in front of it.Place 1 pc pulley below the cable,
Secure it with 1PC M10X50 Allen bolt (95#),2pcs
φ
10 washer (110#) and 1pc M10 Aircraft nut (109#).
B. Draw the cable around the pulley and downwards,place 1pc pulley (80#) onto the cable, secure it
with the 1PC M10X45 Allen bolt (96#),2pcs
φ
10 washer (110#) and 1pc M10 Aircraft nut (109#).
C. Draw the cable around the pulley and front,place 1 pc pulley below the cable, Secure the pulley with
same way in A.
D. Draw the cable around the pulley and downwards,Place 1 pc pulley onto the cable,Secure it with the
same way in A.
E. Draw the cable around the pulley and upwards,Place 1 pc pulley below the cable, And secure it with
the pulley bracket(30#)together with the same way in A.
F. Draw the cable around the pulley and downwards,Place 1 pc pulley onto the cable,Secure it with the
double floating pulley bracket with the same way in A.
G..
Draw the cable around the pulley and upwards, place 1 pc pulley below the cable,Secure it with the
same way in A.
H. Draw the cable around the pulley and place 1 pc pulley (80#)onto the cable,Secure the pulley with the
same way in B.
I. Draw the cable around the pulley and upwards, Place 1 pc pulley below the cable, Secure it with the
same way in A.
34