Force USA F-F50, User Manual

Page: 3 / 27

3
IMPORTANT ASSEMBLY INFORMATION
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.

Tools Required for Assembling the Bench: Adjustable Wrench and Allen Wrench.

Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to be
assembled. Attach washer only to end of the Carriage Bolt .

Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to be
assembled.

Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
FASTEN NUTS AND BOLTS
Securely tighten all Nuts and Bolts after all
components have been assembled in
current and previous steps.
NOTE: Do not over tighten any component
with pivoting function. Make sure all
pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this
step.