9
EN
HAMMERJAW
™
BIND
LIPO
NIMH
3CH
5V DC
CH1
Steering Servo
Connect to battery
Power Switch
Connect to motor
Motor
MAINTENANCE
2 IN 1 ELECTRONIC SPEED CONTROL (ESC) / RECEIVER
Programming:
The ESC comes with a jumper pre-installed in the BATT: Ni-MH
confi guration.
To change battery type to Li-Po, disconnect the jumper from the default port and
connect it to the desired port. Power off the ESC, then power it back on.
If the jumpers are lost or not installed, the ESC will default to BATT: Li-Po.
Operation
LED Status
Sound at Power UP
Stop
ON Solid
Forward
ON Solid
Forward (full speed)
ON Solid
Reverse
ON Solid
Brake
ON Solid
Brake (full brake)
ON Solid
Ni-MH/Ni-Cd Battery
3 beeps
2S Li-Po Battery
3 beeps
ESC Ready
3 beeps
Battery Low Voltage
Blinks
Overheat
Blinks
ELECTRICAL LAYOUT
Included Part #
Replacement Part #
Description
A
DYN1171
DYN1171
Motor
B
DYNB0020
DYNB0020
7.2V Battery
C
SPMS605
SPMS605
Steering Servo
D
FCES13002
FCES13002
Receiver/ Electronic Speed Control (ESC)
DYNC1031
DYNC0500
Battery Charger
A
B
C
D
BIND
3CH
NIMH LIPO
