�Horizontal
�position
TIPS:When syncing your drone keep
it in a horizontal position to start to
ensure a stable flight.
�IIIIIIIIIIIIIIII�
CAUTIONS:
1.When the light on the glove is solid but the drones lights continue to blink slowly,
it means signal matching was not successful. Please turn off the power both of
transmitter and drone th
e
n restart the syncing process.
2.lf the drone is flying sideways dramatically or spinning while hovering, please
switch off the power of both the drone and the glove and repeat the pre-flying
steps.
3.When the lights on the drone flash slowly, it means that the drone is in a low
battery state. Please recharge the drone with the USB cable provided.
CHANG
I
NG THE BATTERY
1.Push the on/off switch of drone to the
OFF position then open the battery
cover.
3.Take out the USB charging cable,
and insert the battery power port
to the small end of it (Make sure
the ports connect tight and correct ).
5.Reconnect the battery wire to
2.Pull out the battery wire from
the power port.
4.To charge battery, please
remove it from
power port than close the battery cover.
the drone, attach it to the provided
USB charging cable and connnect to
any USB charging port. The light on
USB cable wi
l
l turn ON when
charging the battery and will turn OFF
when the battery is fully charged
.
Caution: When using the computer for
char
g
ing please remember to pu
l
l out
the charging cable before shutting
down the computer.
Charging time: 45 to 60 minutes - Flying time:
8
to 12 minutes
-3-
