DUALEX SCIENTIFIC
+
TM
FORCE-A
User’s manual v.3.1
8
Press the button
. You cannot go up to the submenu ‘Measurement’. It is necessary to empty the
memory of the DUALEX SCI™.
► During the measurements, if the free memory decreases below 200 kB, the message «memory
almost full» appears. Press the button
. You can continue the measurements but please empty
the memory as soon as possible.
► During the measurements, if the memory decreases below 2 kB the message «memory full »
appears. Press the button
. The last measurement is saved and the DUALEX SCI™
returns to the main menu. You cannot reach anymore the submenu ‘measurement’. It is necessary
to empty the memory.
II.5.
Submenu ‘USB’
The submenu USB allows transferring the measured data to a computer and also it allows to
update DUALEX SCI™ from a computer.
II.5.a.
Connection
Connect the cable USB to the mini connector USB:
The mini connector USB to be plugged into the
DUALEX
®
’s connector located at the bottom of
the device.
The connector USB to be plugged into the USB
port of the computer.
In the main menu, select the sub-menu ‘USB’ with the buttons
(top) and
(bottom), and
press the button
:
The DUALEX SCI™ behaves then as an USB device.
Use the command interface of your operating system to transfer the file containing the
measurements. In DUALEX
®
, one file is created per calendar day of measurement: all the
measurements of the day are stored in this file, named « DX yyyymmdd.csv », where « yyyy »
represents the year, “mm” the month and « dd » the day. Once the file on your computer, it can be
