Locating the Camera Head with Built-in Transmitter
The camera head with a 512HZ built in sonde transmitter can be located by a
512HZ locator / receiver. The locatable distance is about 15 FT in nonmetallic
pipelines and
10FT IN CAST IRON PIPELINES.
I
Recharging the Battery
1) Plug the charger into the AC socket on the wall and insert the other
end into the DC Jack on the battery box (See Figure2- A)
2) Press the button (See Figure2-B) while the battery box is turned off.
The battery can be charged while the battery box is on and the device
is being used. However, once the power in the battery runs completely
out, it can only be recharged when the battery box is turned off.
3) The charge LED will be red during the process of charging and will
turn green when charging is finished (normal charging time: 5
– 6
hours).
Figure 2
IMPORTANT MESSAGE: Do not overcharge the battery! Overcharging
can result in acid leaking from or damage to the battery
.
14
