Figure 4: Single Orifice Float trap module
*Typical/ Representative Installation and may vary based on application and site
Item No.
Description
1
Spring Loaded Check Valve
2,6
Stop Valve
3
View Glass
4
Single Orifice Float Trap
5
Strainer
Figure 5: Single Orifice Float trap name plate
6. The arrow on the casting should be in the direction of the flow.
4.
If the trap is to discharge to atmosphere ensure it is to a safe place, the discharging
fluid may be at a temperature of 100 °C (212°F).
5.
Install the trap such that the arrow on the name plate points downward to achieve proper
orientation of the trap.
5.
Installation Guidelines: (Refer to Figure 4, 5, and 6)
Note
: Before implementing any installations observe the 'Important Safety notes” in
section 2. Referring to the Installation and Maintenance Instructions, name-plate and
Technical Information Sheet, check that the product is suitable for the intended
installation.
Installation checks and Steps:
1. Check the correct installation location/position and the direction of fluid flow.
2. Remove protective covers from all connections where appropriate, before installation.
3. Ensure the availability of all components as shown in Figure 5, to ensure the operation of the
trap.
7
Single Orifice Float Trap With SLR and/ or TV
4.
If the
trap is
to
discha
rge to
atmos
