Performing a Test
Testing Conditions
• In the case of cold weather or low circulation,
warming up the hands will give best test
results. Device may not be able to complete
reading if there is low blood flow to the
fingertips.
• Thick nail polish and fake nails could interfere
with readings.
Uploading Results
• The FORA SpO2 has Bluetooth capabilities
and is compatible with various FORA Apps as
well as the Gateway.
• To upload results via the Gateway, please refer
to the Gateway guide.
• To pair the device to the iFORA Smart or
iFORA MP app, please refer to the iFORA App
Quick Guides.
1.
Turn on the oximeter by pressing the power
button.
2.
Open the clamp and put one finger into the
rubber hole of the oximeter (letting the finger
touch the bottom) before releasing the clamp.
3.
Do not move when starting or during the test.
4.
After detecting the pulse signal, the oximeter
shows the readings of SpO2 and pulse rate
on the display.
5.
For Gateway users: You will see both the
WSN and NET lights blink on the Gateway
device. Keep your finger on the Oximeter until
you hear two short beeps from the Gateway
indicating a successful upload.
Note: Pressing the power button during a test will
rotate the display.
Helpful Information
