Fora Diamond Nexus, Owner'S Manual

Page: 15 / 116

15
1. Touch Auto-sense Power Switch
for 2 seconds to turn on the
thermometer first.
2. Press the Mode button to
select Object mode.
The temperature unit flashes.
As an Object Measurement Thermometer
NOTE:
• As the forehead measurement temperature is likely
to be affected by sweat, oil and the surroundings, the
reading shall be taken as a reference only.
• If the probe is placed at an angle close to the
forehead measurement, the reading will be affected
by surrounding temperature. Babies
ʼ
skin reacts very
quickly to the ambient temperature. Therefore, do not
take their temperature with the FORA Diamond NEXUS
thermometer during or after breastfeeding, because
the skin temperature may then be lower than the
internal body temperature.
• If the reading is < 32°C (89.6°F), the display will
show together with red LED and three short beeps.
• If the reading is ≥ 37.5 °C (99.5°F) and < 43°C
(109.4°F), the display will show together with red LED
and ten short beeps.
• The thermometer will automatically turn off if left idle
for 10 seconds.