EN-14
4. After successfully pairing the APP with the device, the Bluetooth function of the
meter shall be on before transmitting the data to your APP.
BT Indicator Status
BT Indicator Status
Flash Fast
Pairing mode.
Lit Solid
The connection is established.
Flash Slowly Connection mode.
The transmission procedure is controlled by software, the device will turn off by
software after completion of data transmission. If the device is still on, press
and
the device will turn off.
Note:
• While the meter is in transmission mode, it is unable to perform the test.
• Make sure your device with iOS or Android system has turned on its Bluetooth before
transmitting the data and the meter is within the receiving range.
3. Data transmission via 3G/4G (For FORA D40g only)
Before initiating 3G/4G transmission, insert the SIM card at the bottom of the device
battery compartment to transmit data. Please contact service providers for more
information on SIM card, server information and data transmission.
i. Initiate 3G/4G transmission
To initiate 3G/4G transmission, do one of the following:
(a) with the device turned off, press
to initiate 3G/4G transmission of batch
upload for current user with test results which have not been uploaded,
(b) if Auto-send is set to
On
, the device will initiate 3G/4G after measurement to
send the current new data,
(c) in memory mode, press
to initiate 3G/4G to upload data shows on the
screen.
ii. During transmission
With the device turned off, press
to initiate the data transmission from the
device. “PCL” will appear on the display first and the RF indicator will light up in
blue. Then the test result under transmission will show on the screen.
When the RF indicator is blinking in blue, the data transmission has started. When
the RF indicator shows an orange light, the 3G/4G service is online.
Press
and the device will turn off.