EN
103
Collection box
Slide the empty collection box
9
into the rack
10
, so that the lock
lever
5
is facing towards the
wheels
6
.
Extension cord
Open the lid of the power con-
nector
4
.
Plunger
Only use the plunger
1
to push
smaller material down to the
blades.
Blade adjustment
Turn the blade adjustment
knob
8
into (
+
) direction until
the blade touches metal.
Turn the knob back 1/4 turn.
Circuit breaker
In case of overload, the circuit
breaker
14
trips to prevent the
machine from damage. See
section
Circuit breaker
for fur-
ther information.
Pull the lock lever
5
upwards
to lock the collection box
9
in
place.
Plug the extension cord to the
power connector
4
.
1
1
1
1
2
2
1
2
2
Caution!
Only use extension
cables intended for outdoor
use and not lighter than 1,5 mm
2
.
Use a wall socket with a Re-
sidual Current Device (RCD)
with a tripping current of not more
than 30 mA.
Caution!
Only adjust the
blade while the machine is
running.
Rotation direction
Press the upper part of the di-
rection switch
15
to set the mo-
tor to reverse operation.
Press the lower part of the di-
rection switch
15
to set the mo-
tor to forward operation.
The motor is locked, if the di-
rection switch is in center po-
sition.
