for Living Saltair 088-2280-2, Assembly Instructions Manual

Page: 3 / 22

3
Table of Contents
SALTAIR 10'x10' GAZEBO
Table of Contents
3
5 Important Safety Instructions
Parts List
Step-by-step Guide
8
20
21
Troubleshooting
Caring Fo r Your Item
Warranty
22
Needed for Assembly:
Hammer Screwdriver Ladder 2 people
IMPORTANT:
Please read and understand this manual before any assembly.
Place all parts from the box in a cleared area and position them on the floor in
front of you. Remove all packing materials and place them back into the box.
Do not dispose of the packing materials until assembly is complete. Read each step
carefully before beginning any assembly and make sure you understand each step.
• Install the gazebo on level ground. Stakes are provided to secure the gazebo to the ground.
Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have enough
anchorage in these types of soil. If you wish to secure the gazebo to a wood deck or concrete
surface, use anchors suited to these surfaces. Snow must be cleared off regularly during
snowy days. Remove the snow at the roof top when it is thicker than 2 inches. In order to
avoid damage, use a plastic snow rake to remove excessive snow and ice buildup from roof
and keep away from falling debris. Any assembly or maintenance of the product must be
carried out by adults only. Please check your state and local regulations prior to purchasing.
Some jurisdictions may require permits for installation and use. Some special procedures
may be valid in your area.
For outdoor use only. Chandelier hook maximum weight: 26 lbs. •
•
If any scratch in paint, please touch up to prevent rusting.
If you have any issues with this product, do not return the product back to the
store! For any questions or concerns about our product, please Contact
service centre at 1-877-483-6759, 24 hours / 7 days a week For
further assistance, please write to us at ctc@sunjoygroup.com
IMPORTANT: Please read and understand this entire manual before attempting to
assemble or install the product.
Before beginning assembly of product, make sure all parts are present. Compare parts
with package contents list and hardware contents list. If any part is missing or damaged,
do not attempt to assemble the product.