STEP 2
STEP 3
6
Assembly
•
•
•
•
HELPFUL HINTS
180º
Important Note:
+/- on the cam should be positioned
as shown.
Do not overtighten the cam bolt.
1.
2.
3.
4.
5.
Read each section carefully before starting. It is very important that each step is performed in
the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in a spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support.
• Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a
soft cloth. DO NOT USE harsh
chemicals or abrasive cleaners.
• Move your new furniture carefully. Two people are needed to l
ift and carry the unit to its new
location.
• Never push or drag your furniture (especially on a carpet).
This illustration shows how the cam-fastening system works.
Product No. 063-3449-6 Model No. H13-1076
