b ) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in
outdoor applications, connect the product to a ground fault circuit interrupting (GFCI) outlet. If one is not provided, contact
a qualified electrician for proper installation.
c ) This seasonal use product is not intended for permanent installation or use.
d ) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e ) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f ) Do not let lamps rest on the supply cord or on any wire.
g ) Unplug the product when leaving the house or retiring for the night, or if the product will be left unattended.
h ) This is an electric product — not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
i ) Do not use this product for anything other than its intended use.
j ) Do not hang ornaments or other objects from cord, wire or light string.
k ) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l ) Do not cover the product with cloth, paper or any material not part of the product when in use
m ) This product is equipped with push-in type lamps. Do not twist lamps.
n ) This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product.
Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.
If the replacement fuse blows, a short circuit may be present and the product should be discarded.
o ) Read and follow all instructions that are on the product or provided with the product.
p )
SAVE THESE INSTRUCTIONS
Use and Care Instructions
a) When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the
needles are brown or break off easily. Keep the tree holder filled with water.
b) If the product is placed on a tree, the tree should be well secured and stable.
c) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose connections or exposed copper wire.
d) When storing the product, carefully remove the product from wherever it is placed, such as a tree, branches or bushes, to
avoid any undue strain or stress on the product conductors, connections and wires.
e) When not in use, store neatly in a cool, dry location protected from sunlight.
a )
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
User Servicing Instructions
To replace a fuse:
a) Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment
plug towards blades.
c) Remove fuse carefully.
d)
Risk of fire
. Replace fuse only with 3 A, 125 V fuse (provided with product).
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f)
Risk of fire.
Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
RISK OF FIRE
Do not replace attachment plug. Discard product if the attachment plug is damaged.
To replace a lamp from lampholders:
a. Grasp plug and remove from the receptacle or other outlet device. Do not unplug
by pulling on cord.
b. Pull lamp and plastic base straight out of lampholder.
c. Replace lamp with only 2.5 V, 0.425 W super-bright push-in type lamp
(provided with product).
d. If the new lamp base does not fit in the lampholder, follow these steps:
・
Remove the base of the burned-out lamp by straightening the lamp leads, and gently pull lamp out.
・
Thread leads of new lamp through holes in old base with one lead in each hole.
・
After lamp is fully inserted into base, bend each lead up so that the leads will touch the contacts inside the lampholder.
To reduce the risk of overheating, replace burned-out lamps promptly. Use 2.5 V, 0.425 W lamps only.
To reduce the risk of fire and electric shock: 1 ) Do not install on trees with needles, leaves or branch
coverings made of metal or materials that resemble metal. 2 ) Do not mount or support strings in a manner that can cut or
damage wire insulation. 3 ) Do not overload. This product is rated 20.4 W (CWI50)/40.8 W (CWI100)/61.2 W (CWI150)/
81.6 W (CWI200). Connect other decorative lighting products of the same type end-to-end up to a maximum of 216 W total.
4 ) Always unplug this product before installing or replacing fuses and/or lamps. 5 ) To reduce the likelihood of excessive heat
and possible damage, use only decorative lamp accessories packaged with this product. 6) This is an electric product—not a
toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed within the reach of
small children.
CAUTION:
MODEL# CWI50, CWI100, CWI150, CWI200
SKU No.: 151-3477-8
MADE IN CHINA
(Reference figure only)
(Reference figure only)
Connecting Sets End to End (for connect multiple products)
When multiple products are connected together, do not exceed the lowest of the indicated maximum wattage on the
cord tag near the connected product’s receptacle. Do not overload. This product is rated 20.4 W (CWI50). Connect
other decorative lighting products of the same type end-to-end up to a maximum of 216 W total.
CAUTION:
If connecting to a lighting string that does not have a wattage (W) rating (found on the tag within 3
"
[76.2 mm] of the plug),
calculate the wattage (W) as follows: Multiply the current (A) which is on the flag type label located within 3
"
(76.2mm) of
the plug, by 120. For example, if the string is rated 120 V, 60 Hz, 0.17 A: 0.17×120=20.4 W. Total amount of wattage that
can be connected: 216 W-20.4 W=195.6 W
