for Living Bluebay 088-1796-2, Assembly Instructions Manual, Page: 4 / 30

Requires
C, D, BB, DD
Attach seat frame (D) to back frame (C) by lining up bolt holes on seat frame (D) with
corresponding bolt holes on back frame (C). Insert the M6x20 combination bolt & washer
(BB) and lighty tighten it using hex key (DD). Do not completely tighten until all assemby
is complete.
Requires
A, B, C, BB, DD
Attach right arm (A) to back frame(C) by lining up the bolt holes on the right arm (A) with
corresponding bolt hole on the back frame (C). Insert the M6x20 combination bolt &
washer (BB) and slightly tighten using the hex key (D). Repeat the same steps for the
left arm (B).
Requires
E, F, DD
Ensure all bolts are securely tightened using the hex key (DD). Place the seat cushion (F) and
back cushion (E) onto the fully assembled chair. Secure cushion to the seat with the
hook-and-loop tape.
Requires
A, B, D, BB, DD
Attach left arm (B) to seat frame (D) by lining up bolt holes on the left arm (B) with
corresponding bolt holes on seat frame (D). Insert the M6x20 combination bolt & washer
(BB) and slightly tighten using hex key (DD). Repeat the same steps for the right arm (A).
BB
A
B
C
BB BB
C
D
A
B
D
BB
BB