C
lean
ing a
nd Ma
in
tenanc
e
Te
ch
n
ic
al Dat
a
To wash the fabric parts:
- Spread the fabric and use a soft bristle brush to clean.
- Do not use detergent.
- Water should be cold to lukewarm, not more than 77°F (25°C).
- Air dry only. Do not spin in washing machine or hand squeeze.
Do not use bleach, acid, or other abrasive cleaners on the canopies or frame parts.
Steel components of garden accessories and furniture are coated with rust-inhibiting paint. However, due to
the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched. This is a natural
process. To minimize this condition, it is recommended that care be taken when assembling and handling the
product, in order to prevent the paint from being scratched. Surface rust can be removed easily by applying
a little common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the
oxidation may start dripping onto the assembly surface, which may cause rough stains that could be difficult to
remove.
Caution!
Check all nuts periodically for tightness and tighten them if required.
Disassemble the gazebo in the reverse order of the assembly steps. Always disassemble
the gazebo completely. A partially disassembled gazebo is not stable enough to resist
wind and bad weather, and therefore can be damaged and/or cause damage.
Dimensions (L x W x H)
Weight
11.80' x 9.8' x 9.5'
3.6 x 3 x 2.9 m
106 lb
48 kg
19
W
arra
nt
y
This For Living
™
product carries a one (1) year warranty against defects in workmanship and materials.
Trileaf Distribution agrees to replace the defective product free of charge within the stated warranty period,
when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear
or breakage due to misuse and/or abuse.
Summary of Contents for 088-1613-8
