for Living 063-6294-4, Assembly Instructions Manual

Page: 13 / 32

Fig. 1
Fig. 2
shower stall floor installation
Fig. 2
tub ledge installation
13
A
ss
em
bl
y
Step 7
Requires 8
Place the tape strips (8) around the seams of the tubes.
Place the top of the unit against the ceiling in the desired location (fig.1) and then compress the unit
up and move the bottom end into place (fig.2) so that the unit is in a vertical position.
NOTE: Make sure you are installing in a clean, dry and safe environment.
NOTE: Make sure the assembly is in place, secure and vertical.
NOTE: If needed, refer to STEP 7 to ensure that the assembly measures 2 inches longer than
your tub or shower stall opening height and that the twist tube (2) is tight.
This ensures the proper tension.