Ceramic Heater
4
Important Safety Instructions
SAVE THESE INSTRUCTIONS.
•
This heater draws 12.5 A during operation. To prevent overload and blown fuses, always plug the
heater into a dedicated electrical circuit. Do not plug in any other electrical appliance into the same
outlet or another outlet on the same electrical circuit in which the heater is plugged in.
•
Always connect the heater to properly polarized AC outlet only.
•
Make sure there is no loose connection between the AC outlet and plug, as this may cause
overheating and distortion of the plug. Contact a qualified electrician to replace the loose or worn
outlet.
•
Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to
react to burns. The output of this heater may vary and its temperature may become intense enough
to burn exposed skin.
•
When not in use, always disconnect the heater by turning the power setting control to the OFF
position, then remove the power cord from the outlet.
