8
10
6
Product No. 043-5649-6
Fa
n A
ss
em
bly
Pin Slot
Ti
g
h
t
e
n
6
9
7
Pin
Pin
Locknut
Assemble Rear Grille onto Motor Housing. Rear Grille
should fit into pins on fan motor housing as shown.
6
Thread Locknut onto Motor Housing to lock Rear Grille
in place.
7
Remove any protective covering over shaft before Fan
Blade Installation. Place Fan Blade onto Motor Shaft.
Notice the pin on Motor Shaft should fit into slots of
Fan Blade.
8
Thread Blade Cap onto threaded end of Motor Shaft.
Note: Threads are reversed.
Tighten = Counter-clockwise.
9
With logo upright, attach Front Grille to Rear Grille by
snapping them together. Be sure all 8 clips are secure.
10
