IF YOUR HEATER FAILS TO OPERATE
• Be sure it is plugged in and that the electrical outlet is working.
• Check for any obstruction. If you find an obstruction, turn the heater OFF. Unplug the heater and wait
at least ten minutes for cool-down. Carefully remove the obstruction. Plug the heater in again and restart
it as described in the OPERATION section.
• If you still notice any defect, detach the plug from the outlet and have the appliance checked by
authorized service personnel only.
• Check that the set temperature is not lower than the current room temperature. Set the desired
temperature higher than the current temperature to restart the heater.
Place the heater on a firm
,
level surface, free from obstructions, and at least 3' (0.9 m) away from any wall
and any other objects such as furniture, curtains, plants or combustible material.
• With the power and setting control (1) in the “ ” position, plug the heater into a grounded 120 V
outlet.
: The fan and heating elements operate at LOW setting.
: The fan and heating elements operate at 1500 W.
: The fan and heating elements operate at LOW setting with oscillation.
: The fan and heating elements operate at 1500 W with oscillation.
• Turn the thermostat control (3) to the desired setting between “-” and “+.”
• Turn the heater “ON” by turning the power and setting control clockwise to the desired power
setting ( , , or ). The power indicator light (2) will illuminate. The power settings operate
as follows:
WARNING!
•
Ma
k
e
sure
the plug
f
i
ts
tightly in the outlet. A lo
os
e connection may
cause
o
ve
rheating
and damage to the plug or heater.
•
D
i
sco
nnect the heater
fr
om the power
s
upply when the heater i
s
not in
use
.
7
Operation