FOR-A MV-410HS, Operation Manual, Page: 29 / 66

21 MV-410HS
Audio level meter for up to 8 channels can be displayed for each HD-SDI and SD-SDI input. For
the details on audio level meter settings, see section 4-3-8. "Changing Display Position of Audio
Level Meters" in the MV-410HS Layout Editor Operation Manual.
(1) Peak Level
Peak level can be set in the range of -30dBFS to 0dBFS.
The level bar rises above the peak level, the exceeded part is displayed in red.
(2) Reference Level
Reference level can be set in the range of -60dBFS to -1dBFS.
The level bar rises above the reference level, the exceeded part is displayed in yellow.
The bar below the reference level is displayed in green.
(3) Peak Hold
Shows the maximum level reached in the set length of the time.
If the higher peak is reached, the display changes to indicate the higher peak. When the
peak hold time is elapsed without reaching to any higher peak, it displays the current audio
level. If the peak hold time is set to 0 sec, no peak hold display is provided.
(4) Audio data indicator
Indicates the presence of audio data.
When there is an audio input, it is displayed in green. When there is no audio input, it is
displayed in black.
HD-SDI: Detects active audio data, and indicates the presence or absence of audio data.
SD-SDI: Detects active audio data or audio data of above -60dBFS, and indicates the
presence or absence of the data.
(3) (1)
(2)
(4)
USO
RESTRITO