FOR-A LTR-200HS7, Operation Manual

Page: 33 / 93

33
Item Description
TopTC* Displays the start TC of the currently open file.
EndTC* Displays the end TC of the currently open file.
Duration* Displays the playback duration of the currently open file.
Cached Duration* Displays the cached duration of the currently open file on the internal hard
disk.
Go to [ TC ] and [ CTL ] can be selected. When [ CTL ] is selected, the file start point
is interpreted as the value which is considered to be 00:00:00:00.
Enter a timecode value and press [
ENTER ] to play files from the specified
timecode. If specified timecode values are not included in cached data,
files will be played back while being partially retrieved.
Jump Distance Sets the time for each jump using the [

] and [

] buttons on the front
panel. The default time is 1 minute.
* These items cannot be changed.
4-6. Metadata Display and Setting Screen
When Metadata is selected in the Main Menu screen, a Metadata screen such as the one shown
below is displayed. In recording mode, the metadata
(*1)
to be recorded during recording is set on
this screen. In playback mode, the metadata of the currently open file is displayed and can be
modified.
A USB keyboard is required to perform these settings.
The “
Tab
” key is used to move from one item to the next. The [
ENTER ] or [ PLAY ] button is used to
enter the items selected. The [ MENU ] button is used to cancel the items selected.
*1 Leaving metadata fields blank does not pose any problems for recording. FileID is generated
automatically.
If GroupID is blank, the folder name will be “generic”.
Item Description
MediaID Displays the bar code IDs of the LTO tapes. The bar code ID that has been input
during formatting is displayed, so MediaID is unable to be modified here.
GroupID (*2, 3) Any name can be input for this item. The name input here becomes the name
of the folder in which the recorded data is stored. Up to 70 characters
* 4
.
(Ex. 1) Use original VTR tape numbers.
(Ex. 2) Use a number sequence for programs.
Do not leave this field blank when registering LTO tapes recorded by the unit
to an LTS-MAM.
If this field is blank, “generic” will be used as the folder name.
ContentID Leave this field blank or enter any string, up to 100 characters in length.
This field is intended for content management use, e.g. VTR tape ID numbers
or existing content ID numbers can be entered.
(Continued on next page)