6
3. Replacing Power Supply Units
3-1. Removing the Front Panel
Loosen the two screws on the front panel as shown below, then remove the panel.
3-2. Removing a Power Supply Unit
1)
Loosen the two screws securing the power unit (with problem) as shown below.
2)
Grasp gently pull the broken power supply unit, grasping the screws, straight out, until it is
completely removed from the unit.
3-3. Installing a Replacement Power Supply Unit
1)
Unpack the replacement power supply unit from its packing.
2)
Align and carefully insert the power supply unit into its slot.
3)
Make sure the unit is inserted completely and properly, then tighten the screws on both sides.
Screw
Screw
POWER1 Screw
POWER2 Screw
