FOR-A HVS-300HS, Operation Manual

Page: 38 / 114

28
8-2-2. Setting Up Preview Image
(1) Open the [SETUP – OUTPUT
－
CLEAN/PREVIEW] menu.
OUTPUT : CLEAN : PREVIEW OUT : 1/1
CLN/PVW : =OFF :K=
OFF D= OFF PP= ON :
(2) Turn F2, F3 and F4 to set whether the KEYER, DSK and PinP images are to be displayed
on the preview image. Then press the push-button to confirm the setting for each.
Item Setting Description
ON KEYER image is added to Preview.
K (KEYER)
OFF KEYER image is not added to Preview.
ON DSK image is added to Preview.
D (DSK)
OFF DSK image is not added to Preview.
ON PinP image is added to Preview.
PREVIEW OUT
PP (PinP)
OFF PinP image is not added to Preview.
8-3. Clean Set Up
The switcher can output the CLEAN via an auxiliary output. Users can also add the KEYER
image to CLEAN. To do so, proceed as follows:
8-3-1. Outputting Clean Image
Follow the procedure below to assign the clean video to an AUX output. AUX3 is used in this
example
(1) Open the [SETUP-OUTPUT-AUX XPT] menu referring section 8-1. "How to Select Video
for AUX Outputs."
(2) Turn F1 to select AUX3.
(3) Turn F2 to select CLN.
OUTPUT :SELECT : XPT : CTRL : ANCI : 1/2
AUX XPT : =
AUX3 : = CLN : =ON : =OFF :
8-3-2. Clean Image Set-Up
(1) Open the [SETUP – OUTPUT
－
CLEAN/PREVIEW] menu.
OUTPUT : CLEAN : PREVIEW OUT : 1/1
CLN/PVW : =
ON :K=OFF D=OFF PP=ON :
(2) Turn F1 to set whether the KEYER image is inserted to the clean image. Then press the
push-button to confirm the setting.
Item Setting Description
ON KEYER image is added to Clean
CLEAN
OFF KEYER image is not added to Clean.