26
8. Video Outputs
8-1. How to Select Aux signals
The AUX1 to AUX3 output signals can be selected from all bus sources (IN01-12, Still1-2, Matte
and etc.), program, preview, clean and key out signals. There are two procedures to select
signals for auxiliary outputs: via bus buttons or from menu selection. If you want to select a
signal easily and quickly, select the signal in the KEY/AUX bus. If you want to select a signal not
assigned to bus buttons, select it in the menu.
AUX Control Box (Option)
The auxiliary control boxes allow users to select AUX output signal remotely. Furthermore,
AUX signal selection on the control panel cannot be made if AUX CTRL is set to OFF in the
[SETUP - OUTPUT - AUX XPT] menu.
OUTPUT :SELECT : XPT : CTRL : ANCI : 1/2
AUX XPT : =AUX1 : =BLACK: =
OFF
: =OFF :
8-1-1. Selecting Video in KEY/AUX
(1) Press a button in the BUS SELECT section to select an AUX output
(2) Press a button in the KEY/AUX bus section to select a signal for the selected AUX output.
8-1-2. Selecting Video in the Menu
(1) Press the MENU button and then press the 7/SETUP button to display the SETUP
menu’s top page.
(2) Turn F1 to select OUTPUT. Press F1 or the PAGE DOWN button to display the [SETUP-
OUTPUT] menu.
(3) Turn F1 to select AUX XPT. Press F1 or the PAGE DOWN button to display the [SETUP-
OUTPUT-AUX XPT] menu.
SETUP :>MARKER >CLN/PVW >ANCI >
AUX XPT
OUTPUT :>MV >OPTION
(4) Turn F1 to select an AUX bus.
(5) Turn F2 to select a video signal.
OUTPUT :SELECT : XPT : CTRL : ANCI : 1/2
AUX XPT : =AUX1 : =BLACK: =ON : =OFF :
AUX
P IN P
KEYER
DSK
1
2
1
2
3
PGM
CLEAN
PREV
MV
2
3
4
5
6
7
8
9
10
11
12
1
KEY/AUX
TRANS PREV
AUX
P IN P
KEYER
DSK
1
2
1
2
3
PGM
CLEAN
PREV
MV
2
3
4
5
6
7
8
9
10
11
12
1
KEY/AUX
TRANS PREV
Summary of Contents for HVS-300HS
Page 1: ...HVS 300HS Digital Video Switcher HVS 30OU Operation Unit 1st Edition Rev 1 OPERATION MANUAL...
Page 104: ......
Page 108: ......
