5
2. Output Channels
Each card provides two channels of output and each channel can be independently set.
HVS-100
Each option channel should be set up in the [SETUP
– OUTPUT
－
OPTION] menu.
Additional output channels on SLOT-B are called
B-Ch1
and
B-Ch2
.
Additional output channels on SLOT-C are called
C-Ch1
and
C-Ch2
.
Use these names for additional output settings.
The OUTPUT settings for these channels are initially assigned to
AUX5 to AUX8
, which are
applied in numerical order.
Refer to the HVS-100 operation manual for details on output channel settings.
HVS-2000
Each option channel should be set up in the [SETUP > OUTPUT > OUT XPT] menu.
Additional output channels on
I/O A
slot are called
AUX15
and
AUX16
.
Additional output channels on
I/O B
slot are called
AUX17
and
AUX18
.
Use these names for additional output settings.
Refer to the HVS-2000 operation manual for details on output channel settings.
VRP-100
Each option channel should be set up in the [IO- OUT] menu on the VRP-100RU.
Additional output channels are called
OUT5
to
OUT8
.
Use these names for additional output settings.
Refer to the VRP-100RU operation manual for details on output channel settings.
HVS-490
Each option channel should be set up in the [SETUP - OUTPUT - AUX OUT] menu.
Additional output channels on SLOT A are called
AUX13
and
AUX14
.
Additional output channels on SLOT B are called
AUX17
and
AUX18
.
Use these names for additional output settings.
Refer to the HVS-490 operation manual for details on output channel settings.
