6
Removing Button Caps
Wedge a corner of the pry tool into a side slot along the bottom of a button
cap to remove the cap.
* If the button cap is firmly attached, and cannot be easily removed,
alternately wedge the tool into both side slots to remove the cap.
Attaching Button Labels and Button Caps
(1) Carefully place a button cap over a label aligning the
slots as shown to the right.
(2) Make sure the (right) hook is facing right, then allign the button
tabs and cap slots accordingly. Refer to the figure below showing
the difference between the hooks (left/right).
IMPORTANT
Button switches cannot be installed onto the switch unit unless they are properly
oriented.
Slot
Button label
Hook (right)
Offset
Hook (left)
Centered.
Right
Left
Left and right button hooks
Slot
Tab
Hook(right)
