88
4-7-2. SNMP Settings
Clicking the Setting button in the FA-1010 SNMP Settings section displays the SNMP
settings page.
SNMP System
Item
Character limit
(Alphanumeric and
symbolic characters)
Description
SysName
31 char max
Allows you to set the device name.
SysContact
31 char max
Allows you to enter comments regarding the
device location.
SysLocation
31 char max
Allows you to enter comments regarding the
person in charge of the device.
Authen Trap
-
Enable:
Sends a trap if authentication fails.
Access Community
Item
Character limit
(Alphanumeric and
symbolic characters)
Description
Read Only1
19 char max
Read only SNMP community name
Read Only2
19 char max
Read only SNMP community name
Read/Write1
19 char max
Read/Write SNMP community name
Read/Write2
19 char max
Read/Write SNMP community name
Trap
Item
Character limit
(Alphanumeric and
symbolic characters)
Description
Trap1 Address
---
The SNMP manager
’s IP address to which a
trap is sent.
Trap2 Address
---
The SNMP manager
’s IP address to which a
trap is sent.
Trap3 Address
---
The SNMP manager
’s IP address to which a
trap is sent.
Trap1 Community
19 char max
The community name that sends a trap to
Trap1 Address.
Trap2 Community
19 char max
The community name that sends a trap to
Trap2 Address.
Trap3 Community
19 char max
The community name that sends a trap to
Trap3 Address.
OK (button)
Allows you to apply SNMP System, Access
Community, and Trap settings to the
FA-1010.
