Foppapedretti MYDRIVE, Assembly Instructions Manual

Page: 29 / 96

• ENGLISH •
29
INSTALLING THE CAR SEAT INSTALLING THE CAR SEAT
Step 4: Insert the lap belt into the belt loop
(group 0+) on the opposite side.
Step 5: Tighten the belt to the maximum, by pulling
it in the direction of the red arrow, first on the lap
area then on the diagonal area. If necessary, push
down the locking device lever, let the belt slide, and
then release the lever. Make sure that the belt is not
twisted and that it fits tightly.
Place your child in the car seat and fasten the harness,
ensuring that it is not twisted.
3.2 INSTALLING THE CAR SEAT IN GROUP 1 (FOR CHILDREN FROM 9 TO
18 KG)
The car seat can only be fixed on passenger seats equipped with a 3-point seat
belt. The car seat, when in group 1, must always be forward-facing i.e. with the
child facing the front of the vehicle.
Step 1: Adjust the car seat in the desired position:
1, 2 or 3.
Place the car seat facing forwards on the passenger
seat and make sure that the backrest of the car seat
rests firmly against that of the passenger seat.
1
3
2
Hand wash,
water
temperature
below 30°
Hand wash,
water
temperature
below 30°
Hand wash,
water
temperature
below 30°
Hand wash,
water
temperature
below 30°
Hand wash,
water
temperature
below 30°
OP E N
OF F
F ig. 1 F ig. 2 F ig. 3
4 N O T IC E
CLICK
OP E N
OF F
F ig. 1 F ig. 2 F ig. 3
4 N O T IC E
CLICK