• ENGLISH •
• ENGLISH •
58
①
②
③
③
②
CLICK
①
Unlocking the ISOFIX system
Press both sides of the button simultaneously, the ISOFIX indicator will turn red (fig.
1). Repeat this process on both ISOFIX release buttons. Once the ISOFIX connectors
have been released, slide the connectors along the car seat shell to retract them (fig. 2).
Removing the car seat (fig.3).
USING THE CAR SEAT
USING THE CAR SEAT
Adjusting the seat belt (harness)
To loosen the harnes:
Press the adjustment button and at the same time grip the
straps (chest belts) at the bottom, under the pads of the chest protectors, and pull them
forwards to loosen them.
IMPORTANT: Do not pull on the shoulder pads.
Tightening the harness:
Pull the harness adjustment strap so as to tighten it properly
against the body of the child. The harness is correctly tightened when the gap between
the harness and the child is no greater than the thickness of your finger (1 cm).
NOTE: check that the buckle is secured by tugging the shoulder and waist straps.
ATTENTION: Do not twist or overlap the harness straps.
①
②
③
③
②
CLICK
①
Summary of Contents for FP360
Page 287: ...287 NOTE ...