3JOLI
12
INSTALL FRONT WHEELS (fig.1)
A. Insert the end bushing into the front legs until it is completely locked. Assicurarsi del corretto
montaggio.
B. Insert the end bushing into the slot situated in the center of the wheel block
C. Press the button down front wheel blocked
D. Press the steel button front wheel released
INSTALL REAR WHEELS (fig.2)
A. Assemble the rear wheels along the arrow direction.
B. Insert the rear wheel group into the end of the tubes of the rear legs
C. Press the button situated on the center of wheel and pull it to take the wheel apart from the
axle
UNFOLD THE STROLLER (fig.3, fig.4, fig.5, fig.6, fig.7)
A. Press the folding lock button and then lift up the handlebar to open the folding lock.
B. Step on the lever, and then lift up the handlebar until the stroller is unfolded as diagram B and C
D. Please turn down the folding pedal per attivare la sicura antichiusura
INSTALL ADAPTORS (fig.8)
Insert the adaptors into the notches situated in the both sides and make sure the adaptors are locked
firmly.
ADJUST THE HEIGHT OF THE HANDLEBAR (fig.9)
Press the button situated on the center of the handle bar to adjust the handlebar’s height in three
position.
TO FOLD THE STROLLER (fig.10, fig.11, fig.12, fig.13, fig.14)
Turn on the folding catch before folding stroller (fig. a, fig. b).
Pull the second lock 1 upwards and then press the catch 2 and press down the handlebar until the
auto-folding lock is working
WARNING!
The stroller couldn’t be folder when the seat is facing the handlebar
The stroller couldn’t be folder when the carry cot or car seat are on it!
INSTALL THE SEAT (fig.15, fig.16)
A. Align the seat with the adaptors and press until “clikck” sound.
B. Lift up the buttons of the adaptors with one finger at each side and lift up the seat to remove the
seat
INSTALL THE BUMPER BAR (fig.17, fig.18)
A. Install the bumper bar as diagram.
B. Press the button a) and remove the bumper bar b) as diagram
ADJUST THE FOOTREST (fig.19)
Press the buttons at both side to adjust the footrest up or down.
RECLINE THE BACKREST
(fig.20)
A. To catch hold of the belt with one hand, and push up the Adjusting Holder as shown in picture.
GB
ASSEMBLY
