SAFETY PRECAUTIONS
WARNING:
Do not exceed the 2" per minute squeeze and the ½" per minute release
rates. Temperatures below 32
°
F (0°C) require slower squeezes and
releases. Releases are more critical than squeezes; thus slower rates are
required. Consult your local utility regarding their specific recommendations for this
procedure.
WARNING:
WARNING:
Ensure the grounding system is properly planted in moist soil to reduce
chances of sparking.
WARNING:
Keep away from any high-pressure hydraulic leaks. A high-pressure jet of oil
can cause serious injury. Repair immediately.
MAINTENANCE
This section contains maintenance instructions for the tool. Do not attempt any
maintenance which you do not fully understand, nor that you cannot perform accurately
and safely with the tools and equipment available to you. If you encounter a problem that
you do not understand or cannot solve, contact your Footage Tools dealer.
(Note that
item 11 is pre-calibrated at the factory for proper operation of the tool and it
should NOT be tightened.)
(Ensure the tool is in good operating order by routinely checking the following:)
whichever is greater from fittings, fusions or previously squeezed pipe.
Inspect the pump fluid level (See Preliminary Assembly)
Top up as needed
Inspect the cylinder rods for damage.
Replace if needed
Inspect the tool, pump, valves and hoses for oil leakage.
Tighten, repair or replace as required
Inspect the squeeze bars for damage.
Replace if needed
Inspect the lock-down bolts for damage.
Replace if needed
Inspect the
Stop Blocks for dirt.
Clean as needed.
Inspect cylinder rods for dirt.
Clean as needed.
SPECIFICATIONS
GENERAL C1
600
Max Pipe Diameter:
1
6”
Weight:
1300lbs
Operating Pressure (max):
10,000 psig
ACCESSORIES
Grounding Spike Kit 10 foot
heavy duty
C615
HD-B110
Accessory Kit (pump, 20’ hoses, needle valve w 0.009” orifice, C
812S-AK1
10,000 psi gauge, air filter/regulator/lubricator)
ECN1638A
C1
600 SQUEEZE OFF TOOL FOR PE PIPE
Page
7 of 9
When performing a squeeze, stay a minimum of 1
2" or 3 times pipe diameter
,
Summary of Contents for C16000
Page 1: ...C1600...
