FEATURES
1. Weight measurement
2. BMI calculation
3. Four-button user friendly operation
4. Easily understandable readings
5. 5 user memories for storage of personal information (no. of users memory in
Eprom setting)
6. Fast Memory Recall Mode enables direct access to specific memory location
7. Memory Clear Mode enables erase of memorized contents
8. Auto-on function for weighing-only operation, simply step onto the scale
9. Auto-off function for power saving. Unit will turn off automatically when no key has
been pressed for 10 seconds
10. With blue LCD backlight display
11. Low-battery indicator reminds user to change battery
12. Weight capacity: 200kg, 440lbs or 31st6lb
13. Weight graduation: 100g/0.2lb/0.2lb
14. Height range from 75.0cm up to 225.0cm (2’4” to 7’4”)
15. Operates with 4 pcs AAA alkaline battery
INITIAL SET-UP
1. Uses 4pcs AAA alkaline battery.
2. Insert battery into the battery compartment.
3. Replace battery when is displayed (Fig.1).
4. Select between kilogram, stone-pound and pound conversions
with push-button at the bottom of the scale. (the default setting
unit is kg)
5. Position the scale on a flat and hard floor surface.
The scale must be initialized after each battery insertion or
replacement. Press lightly on the scale platform to initialize the
scale, the display shows then show moving zero and then
turn off. The scale is ready for use after the scale turned off
(Fig.2 & Fig.3).
OPERATION
Weighing Only Operation
1. Step onto the scale and stand still while the weight is computed.
2. The screen displays the weight (Fig.4).
3. The scale turns off automatically after use.
5
4
Fig.1
Fig.2
Fig.4
FUNCTION KEYS
Confirmation button for selection
CLEAR
Clear contents of the user memory in Recall mode
Change value of height
Select memory in Memory mode & Recall mode
Fast recall of memory location
Clear contents of the user memory in Recall mode
▲
&
▼
3.1. If user steps off the scale before stable weight is obtained,
the scale will display 0.0lb/kg for 5 seconds, then the scale
will go to Off mode automatically, moving zero is shown.
3.2. If user steps off the scale after stable weight is obtained,
the stable weight is displayed for 5 seconds, the scale will
go to Off mode automatically, moving zero is shown.
3.3. If user is still on the scale over 20s, the scale will go to
Off mode directly without showing the moving zero.
Fig.3 (
moving zero
)
