background image

And Mor

e

To keep your Accessory Hose 

(E)

handy, just loop

the hose into place in the hose storage rack under
the appliance lid. 

The Manual Seal Button 

(B)

stops the vacuum

process early and seals the bag, preventing fragile
foods such as cookies from being crushed.

1.

Vacuum package as described in previous sections.

2.

To stop process before all air is removed, 
press and release Manual Seal Button. Vacuum

process will stop within a few seconds and 
bag will be sealed.

3.

When motor and Indicator Lights 

(C)

turn off,

open lid and remove bag.

The Antibacterial Drip Tray 

(K)

is made with an

FDA-approved antibacterial ingredient that helps
inhibit the growth of bacteria. The Drip Tray fits
inside the Vacuum Channel 

(J)

and is removable,

making cleanup easy when small amounts of liquids
are inadvertently pulled into Vacuum Channel during
vacuum process. (See 

FoodSaver Reference Guide

for

tips on preventing this.)

Place Drip Tray into Vacuum Channel. Two bag
guides in Drip Tray help correctly position FoodSaver
Bags when vacuum packaging. Slip open end of bag
into guides before closing lid and vacuum packaging.
After each use, empty Drip Tray and wash in warm
soapy water or place on top rack of dishwasher.
Appliance can be used without Drip Tray.

Additional Features

Accessory Hose Storage 

(under lid)

Manual Seal Button

Antibacterial Drip Tray

QS.Pro3_GSturbo_v3  6/29/04  11:22 AM  Page 4

Summary of Contents for GameSaver Turbo







Reviews: