And Mor
e
Ba
gs
&
R
olls
Pulse Mode allows you maximum control over the
vacuum process for crushable items in bags. After
placing bag in Vacuum Channel
(K)
and closing lid,
follow these instructions:
1.
Set Seal Control Switch
(E)
to
Pulse Mode
.
2.
Press down firmly on lid to activate motor, then
release.
3.
Press Pulse Button
(G)
and hold for as long as
desired, then release. Indicator Light
(F)
will flash
quickly after Pulse Button is used. To remove
more air, simply repeat Step 3.
4.
After removing desired amount of air, press
Instant Seal Button
(D)
to seal bag. Indicator Light
will flash slowly when bag is sealing.
5.
When motor and light turn off, vacuum process
is complete.
Tip:
When using Pulse Mode, you MUST press
Instant Seal Button to seal bag. If there is no activity
for 30 seconds, appliance will shut off automatically
and bag will not be sealed.
The Instant Seal Button
(D)
stops the vacuum
process early and seals the bag, preventing delicate
foods such as cookies from being crushed.
1.
Vacuum package as described in previous sections.
2.
To stop process before all air is removed, press and
release Instant Seal Button. Vacuum process will
stop within a few seconds and bag will be sealed.
3.
When motor and Indicator Light
(F)
turn off,
open lid and remove bag.
The Instant Seal Button is also used to end Pulse
Mode (see instructions above).
If you want to seal a bag without vacuuming, use the
Seal Only
position on the Seal Control Switch
(E)
.
You can even reseal bags such as Mylar
®
potato chip
bags.
1.
Place open end of bag on Sealing Strip
(N)
and
close lid.
2.
Set Seal Control Switch to
Seal Only
.
3.
Press down firmly on lid with both hands until
motor starts, then release. Motor and Indicator
Light
(F)
will turn on, indicating bag is sealing.
4.
When motor and Indicator Light turn off, open lid
and remove bag.
Note:
If Sealing Strip is too hot for a mylar bag, try
setting Seal Control Switch to
instead of
Seal
Only
. As long as you place open end of bag on
Sealing Strip (not in Vacuum Channel), no air will be
removed.
1
Additional Features
Pulse Mode
Instant Seal
Seal Only
1.
Place item(s) in bag, allowing at least 3 inches
of space between bag contents and top of bag.
2.
Open appliance lid and place open end of bag
down into Vacuum Channel
(K)
. Make sure roll
material is tucked backed into Roll Storage
Compartment
(J)
or it could prevent the
appliance from operating properly.
3.
Close lid.
4.
Set Seal Control Switch
(E)
to:
to vacuum package using FoodSaver
®
bags
(medium seal time).
to vacuum package moist and juicy foods
such as raw meat (longer seal time).
5.
To begin vacuum process, press down firmly
on lid with both hands until motor starts, then
release. Motor will continue to run.
6.
When motor and Indicator Light
(F)
turn off,
vacuum and seal process is complete. Open lid and
remove bag. Refrigerate or freeze if needed. (See
FoodSaver
®
Reference Guide
for food safety tips.)
3
2
1.
Open appliance lid and place roll into Roll Storage
Compartment
(J)
.
2.
Pull out enough bag material to hold item to be
vacuum packaged, plus at least 3 inches. Close lid.
3.
Turn Seal Control Switch
(E)
to
Seal Only
.
4.
Press down firmly on lid with both hands until
motor starts, then release lid. Motor and Indicator
Light
(F)
will turn on as bag material is sealing.
5.
When motor and light turn off, cut bag material by
pressing down lightly on lid and sliding Bag Cutter
(I)
from one end of sliding channel to other end.
6.
Open lid, remove bag, and tuck roll back into Roll
Storage Compartment before vacuum packaging.
Now you are ready to vacuum package with your
new bag (see below).
Getting Started
Registering your appliance is quick and easy at
www.foodsaver.com
.
Accessor
ies
FoodSaver
®
Accessory Guidelines
FoodSaver
®
Accessories
1.
Always leave at least one inch of space between
contents and rim.
2.
Wipe rim of canister, container or bottle to ensure
it is clean and dry.
3.
Place lid on canister or container, or place stopper
in bottle.
4.
For accessories with a large knob on lid, turn knob
to
Vacuum
. Vacuum package using instructions
below. When vacuum process is complete, turn
knob to
Closed
before removing Accessory Hose.
5.
For accessories without a large knob on lid,
vacuum package using instructions below.
How to Open FoodSaver
®
Accessories after Vacuum Packaging
FoodSaver Vacuum Packaging Canisters
(without large knob on lid)
To release vacuum and open, push gray rubber
button on lid.
FoodSaver Bulk Canisters and Quick
Marinators (with large knob on lid) and
Universal Lids
To release vacuum and open, turn knob on lid
to
Open
.
FoodSaver Jar Sealer with Mason Jars
For use with Ball
®
and Kerr
®
brand Mason jars.
IMPORTANT:
Do NOT use screw bands when
vacuum packaging jars. To open, wedge spoon
between Mason jar lid and highest part of threaded
rim. Twist spoon gently to release vacuum.
FoodSaver Bottle Stoppers
To release vacuum and open, twist and pull up on
Bottle Stopper.
How to Vacuum Package with FoodSaver
®
Accessories
1.
Prepare container according to FoodSaver
®
Accessory Guidelines above.
2.
Insert one end of Accessory Hose
(B)
into
Accessory Port
(H)
on appliance. Insert other
end into port on accessory. Twist tab on
Accessory Hose while inserting to ensure a tight fit.
3.
Turn Seal Control Switch
(E)
to .
4.
To begin vacuum process, press down firmly on
lid until motor starts, then release. Motor will
continue to run.
5.
When motor and Indicator Light
(F)
turn off,
vacuum process is complete.
6.
Gently twist and remove Accessory Hose from
accessory and appliance.
7.
To test vacuum, simply tug on accessory lid. It
should not move.
Note:
For important tips on using accessories
with different foods, please refer to the
FoodSaver
®
Reference Guide
.
1
How to Make a Bag from a FoodSaver
®
Roll
How to Vacuum Package with FoodSaver
®
Bags
Pull Out Bag Material
Set Seal Control Switch
Press and Release Lid
Place Bag in Vacuum Channel
Set Seal Control Switch
Press and Release Lid
Insert Accessory Hose
Set Seal Control Switch
Press and Release Lid
GS Pro.qxd:QS.1505_GSpro_v3.qxd 4/19/07 4:00 PM Page 2
