User Manual
Congratulations
Congratulations on your purchase of the Nat headset. This headset
allows you to communicate wirelessly through your mobile phone and
includes a built-in microphone and earphone.
Package Contents:
• Headset Nat
• Ear hook
• USB Charger Cable
• User Manual
Headset overview:
1
. Status LED
2.
Ear hook
3.
Volume -
4.
5.
Earphone
6.
Multifunction key
7.
Charging port 8. Microphone
The headset can be worn on either ear. Just clip the ear hook on to the
preferred side.
Charging the internal battery:
Before using your headset, please charge the internal battery
completely.
To charge the battery:
1.
Connect the USB Charger to a USB charging port.
2.
Plug the adaptor‘s connector into the charging port of Nat
3.
While charging, the red LED light will stay on and turn off when
charging is complete. You can then unplug the adaptor‘s connector
from the headset and disconnect the adaptor from the outlet.
4.
During normal use you see the red LED blinking, please charge the
Headset
5.
Charging time is about 1,5 - 2 hours
Switching the headset on or off:
To switch on:
Press and hold the multifunction key for 4 seconds until the blue LED
fl
ashes 3 times.
To switch off:
Press and hold the multifunction key for 4 seconds until the red LED
fl
ashes 3 times.
Pairing Procedure:
Your Headset needs to be paired to your Bluetooth
®
mobile phone
before it can be used. This is a two part process; one part is carried out
on the headset and the other is carried out on the mobile phone.
Note
that different mobile phones use different methods of pairing.
To pair your Headset:
1.
Make sure that the Headset is powered off. Press and hold the
multifunction key for about 7 seconds. The blue LED will
fl
ashes
3 times, keep holding down until the LED
fl
ashes red and blue. This
indicates that the Headset is in pairing mode.
2.
Use your phone‘s menu to search for Bluetooth
®
audio devices. The
phone should indicate it has found the „
Nat
“ headset. Con
fi
rm that
you want to pair your mobile phone and headset together.
3.
When asked for a pin key, enter:
„0000“
. Your phone will con
fi
rm
that pairing has been successful.
Note
that there is usually a time limit to pair devices.
If you are unsure how to go through the pairing process on your mobile
phone, please refer to the user manual.
Phone call use
Making a call from the mobile phone
While your mobile phone is paired with your headset, you can use the
mobile phone to make phone calls in the same way as normal. The
only difference will be that the earphone and microphone functions of
the head set will be used instead of the phone‘s.
Answering a call
To answer a call after a ring tone heard in your headset, simply press
the multi-function key.
Note:
You can set your mobile phone to automatically
answer calls, which means you do not even need to press the
multi-function key. Please refer to your mobile phone‘suser guide
for more information about this setting.
Ending a call
During a call, press the multifunction key to hang up. If the other person
hangs up
fi
rst, then the call will end automatically.
Rejecting Calls
Press the multifunction key for 3 seconds during an incoming phone
(tone appears) call to reject the call.
Voice dialling through the headset
When the headset is in standby mode (not in conversation), press the
Volume- key for 3 seconds. You will hear a short tone.
Speak the voice tag immediately. Your phone will make the call.
Note:
To use voice dialling, the corresponding voice pro
fi
les must be
stored in your Phone. Your Mobile must also support this function.
Last number redialling
When the headset is in standby mode (not in conversation), double
press the multifunction key, a tone appears and your phone will re-dial
the last number that you called.
Note:
This function only works on Bluetooth
®
phones that support the
Hands-free pro
fi
le.
Transferring a single call
During a call, you can press and hold the multifunction key for 3
seconds (tone appears), to switch the conversation between the
headset and the mobile phone. Repeat the operation to return.
Note:
Please note that your mobile phone have to support this function.
If your mobile phone does not support it please use it to transfer the
call back to your headset.
Microphone Mute
While talking using the headset press the volume - key 3 seconds to
mute the microphone. Repeat the operation to activate the headsets
microphone.
Adjusting the volume
• To increase the volume, brie
fl
y press the increase key.
• To decrease the volume, brie
fl
y press the decrease volume- key.
Speci
fi
cation
• BT V 2.1
• Supports Bluetooth Headset and Hands-free Pro
fi
le
• RF Frequency: 2.402-2.480GHZ, 2.4G ISM band
• Rechargeable 80mAh Li-Polymer Battery
• Talk time: Up to 4 hours
• Standby time: Up to 100 hours
• Nominal charging time: Max 1.5- 2 hours
In case you need technical support, please contact our support-team
by e-mail under [email protected]
Registration and Safety
Certi
fi
cation/General Information
We hereby declare, that this device carries the CE mark in accordance
with the regulations and standards. It conforms with the fundamental
requirements of the R&TTE- (1995/5/EC), EMC directive 2004/108/EC
as well as the Low Voltage Directive 2006/95/EC.
You can
fi
nd the complete declaration of conformity under
www.fontastic.eu.
Note on environmental protection:
After the implementation of the European Directive 2002/96/ EU
in the national legal system, the following applies: Electrical
and electronic devices may not be disposed of with domestic
waste.Consumers are obliged by law to return electrical
and electronic devices at the end of their service lives to the public
collecting points set up for this purpose or point of sale. Details of this
are de
fi
ned by the national law of the respective country. This symbol
on the product, the instruction manual or the package indicates that a
product is subject to these regulations. By recycling, re-using the mate-
rials or other forms of utilising old devices, you are making an important
contribution to protecting our environment.
1
5
4
2
7
6
3
8
V1_06_15
BT Headset „Nat“
GB