Thank you for purchasing the FontaFit Teso. Please read the
operating instruction carefully and follow the instructions and
notes to get the most out of your Fitness Bracelet.
Package Content
• Fitness watch
• Replacement bracelet
• Charging cable
• This manual
Overview
1. Housing
2. 1.54
″
TFT Display - Touch Sensitive
3. Bracelet
4. Side button
5. Charging connection
6. Sensors
Getting started
Charging the battery
The FontaFit Teso is equipped with a rechargeable Lithium-Polymer
battery. Fully charge the FontaFit Teso prior to putting the device
into operation for the
fi
rst time. For this purpose, please use
attached charger. Connect the Teso with magnetic Charger unit,
in that way, that the pins of the charger unit and the Teso are in
contact (
fi
g.1). and the buit in Magnet hold the Charger unit on Teso charger Port. The charging unit can
be connected with any USB-A power source or the USB-A port of a Computer with 5 VDC and minimum
a current of 300 mA. Connect the USB cable to a USB power source; the battery symbol will show up
and the battery will be charged. The usual charging time is 2.5 hours. The display will indicate, once the
battery is fully charged.
Installing the app
Download and install the “
FontaFit Pro
” app by scanning the QR code or
follow the link:(URL:
www.fontastic.eu/
ff
p
)
Note:
The Android app requires Android 4.4 or later.
The iOS app requires iOS 9 or later.
Switching on/o
ff
Turn it on:
To turn on the Teso Fitness Watch, press and hold the side button for about 3 seconds.
Turn it o
ff
:
You can switch o
ff
Teso via the display in the menu item „Settings“ or press and hold the
side button for around 3 seconds and con
fi
rm switch o
ff
appear in the display.
Connecting and using the app
1.
Activate Bluetooth
®
on your smartphone.
2.
Start the FontaFit Pro app and enter your data such as gender, weight etc.
3.
Switch on the Teso
fi
tness watch, select „ADD“ in the FontaFit Pro app and select the device
from the list.
Note:
Your Fontastic
®
Fitness watch Teso must be connected to your mobile phone via the app
(FontaFit Pro). Do not connect the
fi
tness watch and your smartphone directly via the Bluetooth
®
function of the smartphone.
If the pairing has already been made directly via Bluetooth
®
, Teso must
fi
rst be deleted from the
Bluetooth
®
directory of connected devices on the smartphone.
Pairing must be carried out via the FontaFit Pro App as described below.
Note:
• Only connect the device via the FontaFit Pro app and not via the Bluetooth
®
settings of the
smartphone.
• The personal data is used to calculate the calorie consumption and distance correctly.
After successful connection, the date, time and weather data are transferred from the smartphone to the
Fitness watch.
The following functions among others can be activated by the app:
• Noti
fi
cations: Here you can set which noti
fi
cations are displayed on the Fitness Watch.
• Camera: Here you can use the Fitness Watch Teso as shutter for the smartphone camera.
• Breath (breathing exercises for relaxation)
• Menstrual cycle reminder
• Alarm clock
• Hourly reminder
More information about steps, sleep, pulse, blood pressure, blood oxygen, sports activities and the route
recording is displayed by tapping on the respective menu in the app.
Display
FontaFit Teso has a touch-sensitive colour display. The display can show the date, time, connection
to the smartphone, steps, sleep duration, pulse, blood pressure, blood oxygen, weather, stopwatch,
noti
fi
cations and much more.
Activating the submenu
Swipe down to in the man view to access frequently used functions.
Swipe right in the main view to access the message overview.
Swipe left in the main view to access steps, heart rate, training and stopwatch.
Swipe up in the main view to scroll through the menu.
By touching a desired menu item, you activate the menu.
Note:
Use the button on the side to activate the display and return from any submenu to the clock
display interface. You can also use the button for the stopwatch.
Watch face setting
You can choose between di
ff
erent watch faces. Press the side button until the watch face appears
on the display, then press the display for about 3 seconds. Now you can choose
another watch face.
Tap on „Load more watch faces“ in the app, here you have the choice of hundreds of watch faces,
which you can install on the Teso. If you tap on a watch face, it will be uploaded to the watch.
Steps
The step count, burned calories and distance are displayed.
Sleep
The determined sleep duration is displayed here if you wear the FontaFit Teso while sleeping.
Further data will be displayed in the app.
Note:
The sleep analysis is active from 20:00 to 10:00. It is not possible to record a sleep analysis
during the day.
Pulse
Selecting this menu item starts the pulse measurement.
Blood pressure
Selecting this menu item starts the blood pressure measurement.
Blood oxygen
Selecting this menu item starts the measurement of the the blood oxygen saturation.
Please note:
Wear the bracelet approx. 1cm above your wrist bone and make sure it is close to
your skin. Please note that other factors can lead to measurement inaccuracies:
• Low blood circulation
• Tattoos
• Uneven or jerky movements
• Sunscreen and other lotions
• Dirty sensor
Note:
By using optoelectronic pulse measurement (photoplethysmography), in which your blood
fl
ow is
detected by green LEDs and photo diodes, FontaFit also displays values when the bracelet is worn too
loosely or not worn at all. For this reason, make sure that the wristband
fi
ts correctly when measuring
your heart rate.
Note:
This is not a medical device: Data from the Step, pulse, blood pressure and oxygen saturation
functions are not intended to be used for medical purposes.
Training
Some activities are pre-programmed in the Training menu. You can access the submenu by touching
the Training menu item. There you can activate di
ff
erent sport activities by touching the corresponding
submenu items.
Dynamic heart rate measurement is activated in Training mode. You can end ongoing activities by
pressing and holding the button. Con
fi
rm your selection.
Note:
The recorded data is transferred to the FontaFit Pro app and can be viewed there.
Route recording
The route recorder is an indispensable tool for runners, athletes and tourists. You can use it to record the
routes you have covered with the GPS of your mobile phone in the FontaFit Pro App.
This function is started in the app, it requires activation of the GPS function of the smartphone.
Note:
Route recording is a function of the FontaFit Pro App and not the
fi
tness watch.
Noti
fi
cations and incoming phone calls
Noti
fi
cations or incoming calls are displayed directly on the Fontastic Fitness watch Teso.
In the messages menu you can display the latest noti
fi
cations.
Note:
In the smartphone settings you have to enable the noti
fi
cation of the Teso Fitness Watch in the
respective message app in advance.
Note:
You can only connect one Fitness watch via the app. The use of multiple Teso Fitness watches
with one smartphone at the same time is not supported.
Other menu items
If your Teso
fi
tness watch is connected to your smartphone and within reach, the following additional
menu items are available:
• Current weather and 5-day weather forecast
• Disable vibration function
• Setting the backlight
• Setting Alarm
• Activity reminder
Safety advice:
• Do not open the device
• Do not use the device when it has visible defects.
• The device is water-resistant, not waterproof. Further information on water resistance can be found on
our website www.fontastic.eu.
Technical Data
• Connection: Bluetooth® 4.2
• Battery type: Lithium polymer
• Display: 1.54
″
TFT colour Display, To be seen 1,2”
• Working temperature: -10°- +40° C
• Material Bracelet: TPU
• IP67
FAQ
If you have any questions about the
fi
tness watch or the app, please have a
look at the FAQ section of our website
www.fontastic.eu/faq?fonta
fi
t
,
or scan the adjoining QR Code.
If you need technical support, please contact our support team under
support.fontastic.eu
.
Registration and Safety
Certi
fi
cation/General Information
We hereby declare, that this device carries the CE mark in accordance with the
regulations and standards. It conforms with the fundamental requirements of the
(RED) 2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address:
www.d-parts.de/konfo
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU in the national legal
system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their
service lives to the public collecting points set up for this purpose or point of sale. Details of this are
de
fi
ned by the national law of the respective country. This symbol on the product, the instruction manual
or the package indicates that a product is subject to these regulations. By recycling, reusing the
materials or other forms of utilising old devices, you are making an important contribution to protecting
our environment.
Smartwatch „Teso“
Subject to technical changes / Fontastic, by D-Parts Mobilphon & Zubehör GmbH
●
Birkenweiher Str. 16
●
63505 Langenselbold, Germany / V2_10_20
45
30
1
2
3
4
5
6
fi
g.1
